BECE Basic Technology 2018 Paper 3 Past Questions

Question 1

A safety Wear that protects the head in the workshop

A.apron.
B.boot.
C.glove.
D.helmet.
E.shield

Objective

Question 2

The hand tool that does not require oiling before storage is

A.chisel.
B.hacksaw.
C.mallet
D.pliers.
E.screwdriver.

Objective

Question 3

Chain drive is applicable to the following except

A.bicycle.
B.crane.
C.grinding machine.
D.motorcycle.
E.motor vehicle

Objective

Question 4

The diagram below represents

A.cam and peg.
B.cam and roller.
C.rack and pinion.
D.worm and nut.
E.worm and sector

Objective

Question 5

The diagram below operates by converting ________ into _________ motion.

A.harmonic, rotary
B.harmonic, translational
C.linear, reciprocating
D.reciprocating, translational
E.rotary, linear

Objective

Question 6

The symbol below in a building plan represents

A.arch.
B.door.
C.lintel.
D.partition.
E.window.

Objective

Question 7

The material represented in the figure below is

A.beam.
B.column.
C. concrete.
D.reinforcement.
E.slab.

Objective

Question 8

Which of the following can be used in cleaning cuts in a workshop?

A.Bandage
B.Cotton wool
C. Gauze
D.Plaster
E.Soft cloth

Objective

Question 9

A conventional rescue operation equipment includes the following except

A.ambulance.
B.ladder.
C.stretcher.
D.wheelbarrow.
E.wheelchair.

Objective

Question 10

Which of the following is not a benefit of technology to mankind?

A.Civilization
B.Environmental stability
C.Human comfort
D.Suicide bombing
E.Wealth creation

Objective

Question 11

The item contained in a first aid box that helps to kill germs around a wound is

A.bandage.
B.cotton wool.
C.iodine.
D.methylated spirit.
E.plaster.

Objective

Question 12

Which of the following is not a type of file cut?

A.Bastard
B.Curved
C.Double
D.Rasp
E.Single

Objective

Question 13

The most suitable metal used for manufacturing aircraft body is

A.aluminum.
B.copper.
C.lead.
D.tin.
E.zinc.

Objective

Question 14

Which part of the lathe machine holds the work piece?

A.Bed
B.Carriage
C.Chuck
D.Leadscrew
E.Toolpost

Objective

Question 15

The furnace used for producing cast iron is

A.basic-oxygen.
B.cupola.
C.electric arc.
D.induction.
E.reverberatory

Objective

Question 16

The shearing operation shown in the diagram below is called

A.blanking.
B.chiseling.
C.hacksawing.
D.Punching
E. trimming

Objective

Question 17

The type of soldering joint shown in the diagram below is

A.fillet.
B.grooved.
C.lap.
D.square butt.
E.vee butt.

Objective

Question 18

WHich of the following is not a procedure for board practice?

A.Dimensioning of drawing
B.Drawing of border line
C.Drawing of title block
D.Filling of title block
E.Setting of paper

Objective

Question 19

Producing drawings using pencil and paper only is known as

A.freehand sketching
B.isometric drawing.
C.oblique drawing.
D.orthographic projection.
E. perspective drawing.

Objective

Question 20

The angle marked K in the drawing is ______ degrees

A.30
B.45
C.60
D.75
E.90

Objective

Question 21

A quadrilateral that has its opposite sides equal and its angles not at 90 degrees is called

A.deltoid.
B.parallelogram.
C.rectangle.
D.square.
E.trapezoid.

Objective

Question 22

The method of projection used in drawing the object below is

A.auxiliary.
B.isometric.
C.oblique
D.orthographic.
E.perspective

Objective

Question 23

In oblique projection. blocks are drawn _____ to the viewing plane.

A.adjacent
B.inclined
C.opposite
D.parallel
E.perpendicular

Objective

Question 24

Which of the following is not an orthographic view?

A.Front
B.Left end
C.Perspective
D.Plan
E. Right end

Objective

Question 25

The object below is drawn in

A.cabinet.
B.cavalier.
C.isometric.
D.orthographic.
E.perspective

Objective

Question 26

Which of the following functions cannot be performed by the hand tool shown below?

A.Cutting heads from nails
B.Cutting nails to length
C.Cutting wire
D.Driving-in nails
E.Pulling out nails

Objective

Question 27

The hand tool drawn below is used on

A.bolts
B.nails.
C.nuts.
D.pins.
E.screws,

Objective

Question 28

The purpose of mounting guards on woodworking machines is to

A.ease the operations.
B.give easy adjustment of parts.
C.give steady run of the machines.
D.prevent injuries.
E.provide proper assembling of parts.

Objective

Question 29

The process of reducing moisture content in timber is called

A.abrading.
B.conversion.
C.Planing
D.preservating.
E.seasoning.

Objective

Question 30

In the production of book shelf, the following Fittings are used for the door except

A.castors.
B.catches.
C.handles.
D.hinges.
E.locks.

Objective